The innoSens ion concentration electrode uses the solid state ion selective electrode principle for high measurement accuracy and easy cleaning of the front sensing tip. PTFE large exudate interface is resistant to blockage and contamination. Available as innoSens 510 fluoride ion electrode and innoSens 520 chloride ion electrode.

innoSens 810S sensor with innoCon 6800S controller for sludge concentration measurements up to 30 g/L

Low turbidity sensor innoSens 820T with innoCon 6800T controller for measuring low range turbidity.

The innoSens 810T sensor with innoCon 6800T controller can measure suspended solids, 0-2000mg/L.

innoSens 710 electrode, PA-711 flow-through tank for measuring residual chlorine/chlorine dioxide/ozone in water. The advanced non-membrane constant voltage electrode eliminates the need to replace diaphragms and chemicals and provides high sensitivity, stable performance and simple maintenance.

The innoSens 420 Dissolved Oxygen Electrode is a ppb class industrial in-line dissolved oxygen electrode with Clark technology, integrated membrane head design and stainless steel flow-through tank for easy installation and maintenance.

Measurement principle of the innoSens 420 dissolved oxygen electrode of Jensprima Dissolved oxygen measurement is currently widely used in the Clark (polarographic) technique. The electrode generates a current proportional to the partial pressure of oxygen and this current can be measured by a suitable measurement method. To prevent interference, the Clark electrodes are covered with a permeable membrane. The PTFE film often used in the past was very brittle in its physical properties and therefore had to be replaced frequently to ensure reliable measurements. To solve this problem, the innoSens 420 uses the more stable OPTIFLOW membrane, which remains stable under harsh conditions, such as high pressure. This ingenious design results in a fast response time even at low flow rates. No maintenance is required and there is no need to replace the membrane or electrolyte. When the sensor can no longer be calibrated, please replace it. Translated with www.DeepL.com/Translator (free version)

The innoCon 6500D online dissolved oxygen analyser with innoSens420 maintenance-free dissolved oxygen electrode provides continuous monitoring of dissolved oxygen in water, NTC automatic temperature compensation and panel mounting for use in all types of weather and in a variety of complex industrial environments.