innoCon 6800CL Controller is specially designed for water treatment and industrial process control. Used with innoSens 710 sensor and PA-711 flow cell, it can measure the concentration of residual chlorine, chlorine dioxide and ozone in the water. Its adoption of membrane free constant voltage sensor eliminates the need for membrane and reagent replacement. Furthermore, it is highly sensitive and stable, only requiring simple maintenance.
Technical Data
Measurement parameter
Free chlorine / Cl2: 0 - 2.000 / 0 - 20.00 ppm (mg/L)
Chlorine dioxide / ClO2 D. 0 - 2.000 / 0 - 20.00 ppm (mg/L)
Ozone / O3: 0 - 2.000 / 0 - 20.00 ppm (mg/L)
Input
Measuring sensor: innoSens 710 potentiostatic sensor
Temperature probe: Pt-1000 / NTC-10K (optional)
Output
Analog Output 1: 4-20 mA isolated current output for Cl2/ ClO2/O3/(or it can be made to represent any segment of the measuring scale) Load: Max 600Ω
Analog Output 2: 4-20 mA isolated current output for TEMP.(it can be made to represent any segment of the measuring scale) Load: Max 600Ω
Relay 1&2 (Alarm):
Operation: ON/OFF
Selectable action : High / Low
Set Point: High/10.00mg/L; Low/4.00mg/L (adjustable)
Hysteresis: 0.10mg/L (adjustable)
Relay contacts: 5A/250VAC;5A/30VDC
Relay 3 (Washing Relay):
Wash interval: 0.1~1000hour
Wash time: 1~1000s
Relay contacts: 5A/250VAC;5A/30VDC
Interface:
RS 485 Modbus RTU
Baud rate: 9600 bps
Data format: 8 bit
General Information
Power supply: 90 - 260V AC, 50/60Hz; 24VDC(Optional)
Temperature: Operating temperature: 0 - 60 ℃
Storage temperature: -20 - 70 ℃
Humidity: Max. 90% rH at 40℃ (non-condensing)
LCD Screen: Big-size screen of crystal display, white back ligh
Language: Chinese / English
Passcode: Set mode: 0022, Calibration mode: 0011
Protection grade: IP65
Dimensions: 144 * 144 * 110mm
Installation: Wall/Pipe/Panel Mounting
Panel Cut Size: 138 * 138mm
Weight: 0.85Kg
Ordering Guide
Cl2/ClO2/O3 controller
Order No. |
Type |
Descriptions |
33-6801-40 |
innoCon 6800CL |
Potentiostatic controller, 90 - 260V AC |
33-6801-44 |
innoCon 6800CL |
Potentiostatic controller, 24V DC |
Accessories
Order No. |
Type |
Descriptions |
35-0710-00 |
innoSens 710 |
Potentiostatic sensor |
50-0711-00 |
PA-711 |
Flow cell for innoSens 710 |
QUESTIONS? WE'RE HERE TO HELP.
CONTACT US