innoCon 6800T Turbidity/Suspended Solids Analyzer

innoCon 6800T Turbidity / SS Analyzer is based on 90 ° scattered light and is EN ISO 7027 compliant. When the light passes through the solution, a portion is absorbed and scattered, and the other is passed through the solution so that the turbidity and the suspended matter of the water sample can be measured by measuring the intensity of the scattered light of the particles in the water. It is equipped with innoSens 810T sensor, can measure the turbidity of 1000NTU or suspended solids 2000mg / L

Relay 1&2 (Alarm)：

Operation: ON/OFF

Selectable action : High / Low

Set Point: High/10.0 g/L; Low/4.0 g/L (adjustable)

Hysteresis: 0.01 g/L (adjustable)

Relay contacts: 5A/250VAC;5A/30VDC

Relay 3 (Wash Relay)

Wash interval: 0.1~1000hour

Wash time: 1~1000s

Relay contacts: 5A/250VAC;5A/30VDC

Interface

RS 485 Modbus RTU

Baud rate: 9600 bps

Data format: 8 bit

General Information

Power supply：90 - 260V AC, 50/60Hz; 24VDC(Optional)

Temperature:

Operating temperature: 0 - 60 ℃

Storage temperature: -20 - 70 ℃

Humidity: Max. 90% rH at 40℃ (non-condensing)

LCD display: Suspended solids value and relay status

Language: Chinese / English

Passcode: Set mode: 0022, Calibration mode: 0011

Protection grade: IP65

Dimensions: 160 * 166 * 73mm

Installation: Wall Mounting

Weight:1Kg

Sensor Information

Type: innoSens 810T

Material: 316L/PVC shell, special optical glass

Size:

Diameter: 42mm

Length: 210mm

Connection: 1”GAS

Cable:10 m

Max. Pressure: 4 bar

Protection grade: IP68